|
| No Image |
 |
| M.A.T “Supervelox” scouring and milling machine load 12 pieces into 4 chambers, year 1992
|
|
| Reference code: REF-19-2620-05262010 |
|
| |
|
| No Image |
|
| M.A.T “Supervelox” open width scouring 1700mm |
|
| Reference code: REF-19-2620-05262010 |
|
| |
|
|
|
| 1 Davis Standard Extruder
3.5 inch diameter screw
Model 35IN35
Air Cooled,
Year 1998
Price: ex mill floor USD 40,000.00
16 Quench Cabinets
16 Godet Sections
2 Roll
Price: ex mill floor USD 2,000.00 Set
19 Toray Take up Winders
Model TW-603
4 Threads per winder
90mm diameter take up tube
1998
Price: ex mill floor USD 15,000.00 each
|
|
| Reference code: REF-21-0709-01082010 |
|
| |
|
|
|
| 3 Davis Standard Extruders
2.5 inch diameter screw
Model 25IN25
Air Cooled,
Year 1996
Price: ex mill floor (2) USD 30,000.00 each
(one extruder is fitted with
Hartwig 1½" Model 15M24 Sidearm
Extruder for Color Resin)
Price: ex mill floor (1) USD 40,000.00
4 EMS Spin Beams
16 positions per spin beam
Price: ex mill floor USD 5,000.00 each
64 Quench Cabinets,
64 Godet Sections, 2 Roll
Price: ex mill floor USD 2,000.00 Set
64 Comoli Take up Winders
Model WTU-450
4 Threads per winder
90mm diameter take up tube
1999
with:
Westinghouse Emmerson Accuspede Inverters
For extruders and Take up Winders
|
|
| Reference code: REF-21-0709-01082010 |
|
| |
|
| No Image |
|
| COMPLETE COTTON RECYCLING FACTORY FOR SALE:
(PICTURES AVAILABLE)
1 FULLY AUTOMATIC LINE; MANUFACTURER LAROCHE; YEAR: 1980
2 FEEDING TABLE CONVEYORS, WITH METAL DETECTOR
1 FIBER OPENER
2 STEP-CLEANERS (FOR BIGGEST TRASH) WITH MAGNETS
1 PORCUPINE CLEANER
3 FINE OPENERS (SPECIAL COTONIA CARDTYPE WITH 1.5 M SAW-GIN CYLINDER FOR REMOVING THE SMALLER TRASH AND SPECKS) WITH SPARE CYLINDER
1 BALING PRESS FAES BRAND WITH CONDENSER AND FEEDING CONVEYOR ROOM
1 ROTATIVE FILTRATION FOR DUST LUWA BRAND
1 COMPACTOR FEEDING 1 BALING PRESS FOR FINAL LOSS WASTES AND DUST, TOTALLY AUTOMATIC INCLUDING WIRING, FAES BRAND
1 ROVINGS OPENER LAROCHE BRAND,PULLING SYSTEM, WITH METAL DETECTOR + ALL ELECTRICAL FAMES,CONDENSERS AND AIR PIPES
ONLY ONE PERSON PER SHIFT CAN HANDLE THE WHOLE LINE.
CAPACITY: DEPENDS HOW DIRTY IS THE INPUT WASTE AND WICH CLEANING DEGREE DO YOU WANT TO REACH, DEPENDING OF YOUR CUSTOMER REQUIREMENTS.
WITH GIN-MOTES LOOSING 50%, INPUT IS 700 KG PER HOUR AND CLEANED OUTPUT IS 350 KG PER HOUR.
WITH CLEANER WASTES OUTPUT IS HIGHER.
WE CAN ALSO BUY PART OF THE OUTPUT CLEANED COTTON.
POTENTIAL BUYERS: COARSE COUNTS OPEN-END SPINNERS, COTTON WASTE MERCHANTS, SANITARY HYDROPHILIC COTTON BLEACHERS, NONWOVEN FOR MATRESS OR FOR SANITARY PADS, RAW COTTON GINNERS, ETC...
AIM: CLEANING COTTON WASTES LIKE GIN-MOTES,LINTERS AND/OR SOFT SPINNING WASTES LIKE COTTON CARD WASTE, STRIPS, DROPPINGS, AND LINEN, WOOL,ETC....
MACHINES IN RUNNING CONDITION.
PRODUCTION STOPPED.
|
|
| Reference code: REF-21-0113-10162009 |
|
| |
|
| No Image |
|
| Cogeneration Plant (SOLAR GAS TURBINE MODEL TAURUS 60 VERSION :7001), First start-up 1997, 3. overhaul
4,5 MW, Turbine hours: 13000 h, 3 overhaul. Next overhaul 17000 h later,
Alternator: SIEMENS, TYP:1FC 1 802-4 HC 607 3
Transformer: Etitas (local company, made in Turkey), waste heat boiler DESA (local company, made in Turkey), Nominal Power: 6,0 MW
Fuel types: Naphta, Light Fuel Oil,
Control System: Siemens, Simatic S5
Frequency: 50 Hz
Scope:
GTG package including alternator, with sound enclosure,
On crank washing unit (with 350 lt demi water tank)
Heat recovery steam generator, with economiser
Fuel system Naphtha, Diesel Oil
Tank farm (2x270 m3, dia: 6 m, h: 10,5 m)
Pump groups
Complete Control System
|
|
| Reference code: REF-20-1915-09242009 |
|
| |
|
| No Image |
|
| Texpa Cross Hemmers
2 Lane/ Buggy Entry
Cut/ Hem/ Label Insert
Pegasus Sewing Heads
(1) 1994, Model QRSN 12,
TAG # 49195
|
|
| Reference code: REF-21-0709-07242009 |
|
| |
|
| No Image |
|
| Texpa Cross Hemmers
2 Lane/ Buggy Entry
Cut/ Hem/ Label Insert
Pegasus Sewing Heads
(1) 1990, Model RSN 12,
TAG #19194
|
|
| Reference code: REF-21-0709-07242009 |
|
| |
|
| No Image |
|
| Texpa Cross Hemmers
2 Lane/ Buggy Entry
Cut/ Hem/ Label Insert
Pegasus Sewing Heads
Year: (1) 1990, Model RSN 12,
|
|
| Reference code: REF-21-0709-07242009 |
|
| |
|
| No Image |
|
| S.S. Package Carriers
37 Pins (1,100 lb./Capacity)
Year: 1990
TAG # 48979
|
|
| Reference code: REF-21-0709-07242009 |
|
| |
|
| No Image |
|
| MAAG WINDING MACHINES
Type CT 5206Ae/IP/G
with Winding Unit behind the Operator |
|
| Reference code: REF- 06-2315-06232009 |
|
| |
|
| No Image |
|
| FITE FOAM SIMPLEX 31E.2000 FOAM LAMINATINGMACHINE
(LAMINATING BY GAS-FLAME)
YEAR: 2000
WORKING WIDTH 1800mm (72")
ROLLING AT EXIT
|
|
| Reference code: REF-21-0113-06062009 |
|
| |
|
| No Image |
|
| FITE FOAM DUPLEX 32/2000 FOAM LAMINATING MACHINE
(LAMINATING BY GAS-FLAME)
YEAR: 1997
WORKING WIDTH 2000mm (80")
ACTUALLY ONLY 1 GASBURNER INSTALLED
ROLLING AT EXIT
|
|
| Reference code: REF-21-0113-06062009 |
|
| |
|
| No Image |
|
| RESTA QUILTER
MODEL GRAFO 3
TYPE H220CNKSS
INCLUDING:
-PNEUMATIC TRANSFER/SETUP TABLE
-PATTERN PROGRAMMING UNIT
-BOBBIN WINDER
-EXTRA PARTS
-COMPLETE LIBRARY OF PATTERNS
|
|
| Reference code: REF-21-0113-06062009 |
|
| |
|
| No Image |
|
| BARMAG SPIN DRAW LINE
(ALMOST NEW)
YEAR: 1998
72 THREAD LINES
12 CRAFT WINDERS
6 ENDS PER WINDER (6 COPS)
170mm TRAVERSE (PER COP)
110mm CHUCK DIAMETER
6000 METERS PER MINUTE
HOT GODETS
12E - 9 BARMAG EXTRUDER, 75kw INVERTER DRIVE
CPF (CONTINUOUS POLYMER FILTER)
SILO
CRYSTALIZER
DRYER
7.5 TO 9 TON PER DAY ON 150 DENIER
CAN PRODUCE FROM 20 TO 200 DENIER
|
|
| Reference code: REF-21-0113-05162009 |
|
| |
|
| No Image |
|
|
FADIS REELING MACHINES
YEAR: 1990
MODEL MR3-1000
6 POSITIONS
INVERTER: 3 SETS
DC: 1 SET
IN NICE, RUNNING CONDITION
THIS MACHINE IS MAKING A HANK (SKEIN) FROM A CONE
|
|
| Reference code: REF-21-0113-05072009 |
|
| |
|
| No Image |
|
| SCHMALE AUTOMATIC STITCHING TABLES
YEAR 1983
TYPE AI KBE RL-20
WORKING WIDTH 1800mm (71”)
DOUBLE-SIDED AUTOMATIC STITCHING TABLES FOR LONG SIDE HEMS FOR SEAMING PANELS OF TERRY CLOTH TOWELS AND DISHCLOTHS, ETC.
|
|
| Reference code: REF-21-0113-05072009 |
|
| |
|
| No Image |
|
| Barmag extrusion line, 2007 year, each comprising:
Nº 1 Barmag extruder 120mm diameter
Nº 2 spinning heads, 4 spinnerets each with 203 capillaries
Nº 1 drawing group, 6 duo godets made by Dienes
Nº 2 Barmag winders model ASW 1200/4X300
|
|
| Reference code: REF-21-0113-05012009 |
|
| |
|
| No Image |
|
| Barmag extrusion lines, 2007 year, each comprising:
Nº 1 Barmag extruder 90mm diameter
Nº 1 spinning head, 4 spinnerets each with 203 capillaries
Nº 1 drawing group, 6 duo of godets made by Dienes
Nº 1 Barmag winder model ASW 1200/4X300
|
|
| Reference code: REF-21-0113-05052009 |
|
| |
|
| No Image |
|
| Uster Tester 3
D Tensioner EC5
B Sensor EC4
Conveyor EC3
Fiber Absorber EC23
Evenness Converter UT3-FC1
Line Conditioner UT3-LC
Printer
Keyboard
|
|
| Reference code: REF-21-0709-04302009 |
|
| |
|
| No Image |
|
| Uster Evenness Tester
Model UT3
(1988);
Auto Load; Auto Bobbin Changer/Creel
with Type-D Tensioner;
Type-B Sensor; Type-B Absorber;
Converter Processor; and Printer
|
|
| Reference code: REF-21-0709-04302009 |
|
| |
|
| No Image |
|
| Uster Eveness Tester
Model UT.III
Comprising of:
Even-ness Processor EC1 sn.2112
Absorber Tpe B EC2 sn 1723
Conveyor EC3 sn 1733
Sensor B EC4 sn 1779
Tensionner D EC5 sn 2134
Signal processor with keyboard
UT3 Line converter
|
|
| Reference code: REF-21-0709-04302009 |
|
| |
|
| No Image |
|
| Uster Tester 3 Evenness Tester,
consisting of:
UT3-EC1 Bottom Stand
UT3-EC2 Absorber
UT3-EC3 Conveyor
UT3-EC4 Sensor
UT3-EC5 Tensioner
UT3-SP Signal Processor
UT3-LC Line Conditioner
33915
|
|
| Reference code: REF-21-0709-04302009 |
|
| |
|
| No Image |
|
| Complete UTIT Automatic Transport
with:
5 Bobbin strippers and 5 bobbin exchange
Year: 1989
Rebuilt in 2007
|
|
| Reference code: REF-21-0709-04232009 |
|
| |
|
|
|
| COMPLETE AIR CONDITIONING SYSTEM MARTEL DUAL 20 year 2004
THE PLANT IS FOR 20.000 M3 PER HOUR
THE DUST IT IS REMOVE BY A FILTER THAN IT IS WARM UP OR MAKE COLD AND COME BACK IN THE PRODUCTION ROOM CLEAN
THE PLANT IT IS COMPLETE OF TUBES, ELECTRICAL PANEL, GAS BOILER FOR HOT WATER, SOFTENERS, FILTER
|
|
| Reference code: REF-09 -1920A-04172009 |
|
| |
|
| No Image |
|
| Steam boiler instalation:
Steam boiler Viessmann (Germany), Type Vitomax 200 HS, heating power 8000 kW, pressure of steam up to 10 bar, max. Temperatur 184 °C, y.o.c. 2005, y.o.c. of installation: March 2006
Burner: Weishaupt, Gas, with automatic control, G 70/2-A-ZMD
Steam power output: 12 ton/h
Boiler instalation supplied with:
Ekonomizer – ECO-SPI-4, W0505010,
2 pumps Grundfos CR 15
1 condensate tank
1 water purification instalation 5 m3/h
1 automatic surface blowoff and boiler blowdown
1 Kamin mit 12 m H;he
Condition: excellent (as new)
Surface for this instalation: 15 x 10 m min
|
|
| Reference code: REF-07-0221-04192009 |
|
| |
|
| No Image |
|
| SCARVES, SHAWLS & BLANKETS - SLITTING & CROSS CUTTING:
SLI112 - LAFER SLITTING & CROSS CUTTING, 1997
1 x LAFER SCARF / BLANKET SLITTING MACHINE - TYPE SSM H2000
1 x LAFER SCARF / BLANKET CROSS CUTTING MACHINE - TYPE SST H200
|
|
| Reference code: REF- 05-1301-04012009 |
|
| |
|
| No Image |
|
| SCARVES, SHAWLS & BLANKETS - FRINGING:
FRI001 2 x LAFER FRINGING MACHINES TYPE FRV, 2.2m, 1995
|
|
| Reference code: REF- 05-1301-04012009 |
|
| |
|
| No Image |
|
| Complete Spray Bond Line
Consisting of:
(1) Fiber Controls Blendline
(4) Feeders 36"
w/Weigh Pans/ Load Cells
Electronic Controls
(2) P&S Garnetts, 60" Wide
Tandem, Double Doff
Feeders
(2) Camelback Lappers
160" Laydown
(1) Aztec 3 Pass Oven
160" ww, Metal Slat Conveyor
(1) Winder w/Electronic Scales
(1) Edge Trim Picker
w/Spray Nozzles
|
|
| Reference code: REF-21-0709-03242009 |
|
| |
|
| No Image |
|
| Diathermic oil THERMAL POWER PLANT THERMA mod. DTO 400 yoc 2000, production 4 million kg of calories/hour, entirely automatic boiler.
|
|
| Reference code: REF-06-1001-03112009 |
|
| |
